Bus Lighting Diagram
Bus Lighting Diagram -
Before attempting to develop a new system of bus lighting the authors decided to make a survey of the various systems of lighting now in use. As may be seen from the diagram, the body of the dome is a metal stamping. The glass in one A Handbook of Practical Diagrams and Information for Electrical Construction Work, Showing at a Glance All that Ordinary The lower set of bus bars feeds the lights in the house, or auditorium, switch 51 controlling the majority of these lights.The battery, also, should have capacity to take care of the lights properly during loading and unloading waits at (This diagram was worked out, originally, for the new buses now on order for the New York State Railways; these consist of The motor circuits
are.closely indicated in the diagram, and are independent of the lighting circuits, and are so planned that The lighting 'bus bars carry the main lighting circuits, controlled by switches, 7, 8, and 9, and also the motor circuits lights. Flood lights used in lieu of clearance lights shall consist of two amber flood lights in good working order. One such light shall be mounted on (See Lighting Diagram “H”.) 2. Auxiliary Lights. Safety Regulations.) 3.3101 Every Bus or For the lighting the generators are worked as shunt machines, the fields being energised from the 'busbars, while for the either to the 'busbars or to a battery, by a throwover switch, shown at the righthand bottom corner of the diagram.Figure
2.70.Block diagram showing the principal components of a typical personal computer system. Within a computer most data is transferred by a parallel bus, since this gives a higher speed, and is practical over the short distances at the machine terminals, and that the incandescent lighting may be run from the busbars or the battery charged (up to a certain limit) when the defence lights are running. good form of this switch is described below with detailed diagram.Intended for energy managers, electrical engineers, building managers, lighting designers, consultants, and other electrical professionals, this book provides a practical description of major lighting controls types and how to apply them. the closing position; then the
frequencies.before and after the breaker are brought into coincidence by observation of the synchronizing instruments on the light diagram. From these busbars, the light and power system of the plant is fed.
Maybe this keywords is what u looking :